Licensed & Insured · Serving All of Texas · Free Inspections(866) 625-1977 Free Estimate

2026 TEXAS ROOFING PRICE GUIDE

How Much Does a New Roof Cost in Texas? A 2026 Price Guide

Nobody likes a mystery number on the back of a business card. This guide answers the question the way an estimator would — by the square, by material, by region — so you walk into your estimate already knowing the range.

Written EstimatesLicensed & InsuredFinancing AvailableInsurance Claims HelpFree Inspection

Reviewed by the Texas Pro Roofer estimating team · Updated September 2026

Line-ItemWritten estimates, no guessing
Licensed & InsuredTexas roofing crews
FreeInspections & estimates
FinancingMonthly payment options

The Quick Answer

How Much Does It Cost to Replace a Roof in Texas?

For a typical single-family home, most asphalt-shingle roof replacements in Texas land roughly between $9,000 and $22,000 installed. That is a wide band on purpose — a simple ranch in Katy and a steep, cut-up two-story in The Woodlands are not the same job. Step up to Class 4 impact-resistant shingles, standing-seam metal, or tile and the number climbs, but so does the lifespan and, often, the insurance savings.

Every figure on this page is a typical, approximate range, not a quote. The only way to get a real price is a look at your actual roof. That part is free — request an inspection and we hand you a written number you can hold us to.

Price by the Square

Roof Cost per Square in Texas (100 sq ft)

Roofers price by the “square” — 100 square feet of roof surface. Because of pitch and overhangs, your roof area is usually larger than your floor plan. These are approximate installed ranges per square, with the common extras broken out.

Line Item Approximate Range Notes
Architectural asphalt shingle Roughly $350 – $800 per square The Texas standard; includes underlayment and basic accessories
Class 4 impact-resistant shingle Roughly $450 – $1,100 per square Hail-rated; may earn an insurance discount
Standing-seam metal Roughly $700 – $1,800+ per square Concealed fasteners, decades of service
Concrete or clay tile Roughly $800 – $2,000+ per square Heavy; framing may need review
Tear-off of a second old layer Roughly $100 – $200 per square extra Labor plus disposal
Decking replacement Roughly $75 – $150 per 4×8 sheet Only where wood is rotted or soft
Permit & inspection Roughly a few hundred dollars Set by your city; not every jurisdiction requires one

Multiply a per-square figure by your square count for a sanity check on any bid. Our roof replacement team will price more than one system; read up on impact-resistant shingles and metal roofing first.

Price by Material

What a Whole Roof Costs by Material

Material is the biggest lever on your price. Here is how common Texas systems compare on a typical 2,000–2,200 sq ft home (roughly 22–26 squares), installed.

Roofing System Typical Installed Range Expected Lifespan
Architectural asphalt shingle $9,000 – $18,000 15–25 years
Impact-resistant (Class 4) shingle $12,000 – $24,000 20–30 years
Standing-seam metal $18,000 – $40,000+ 40–70 years
Concrete or clay tile $20,000 – $45,000+ 40–50+ years
Flat / TPO (low-slope sections) $8 – $14 / sq ft 20–30 years

Ranges are approximate and vary with roof complexity, current material prices, and your region of Texas.

Price by Size

Asphalt Roof Cost by Home Size

Ballpark figures for an architectural-shingle replacement. Per-square pricing runs a little higher on small roofs because setup and dumpster costs do not shrink in proportion.

Home Size Approx. Roof Squares Typical Asphalt Range
1,000–1,200 sq ft 12–16 $6,500 – $11,000
1,500–1,800 sq ft 18–22 $8,500 – $15,000
2,000–2,500 sq ft 24–30 $11,000 – $20,000
3,000+ sq ft 34–44+ $16,000 – $28,000+

Reading the Fine Print

What’s Included in a Real Roofing Quote

Two bids that look thousands apart are often pricing different jobs. Before you compare totals, make sure each estimate spells out the same scope. A complete quote should list:

  • Full tear-off of the existing shingles, with the number of layers stated and disposal included.
  • Decking inspection and a per-sheet price for any rotted plywood that has to be replaced.
  • Underlayment type — synthetic or felt — plus ice-and-water membrane in valleys and around penetrations.
  • Shingle brand, line, and wind rating, not just “architectural shingles.”
  • Drip edge, starter strip, ridge cap, and pipe boots called out as new, not reused.
  • Flashing at chimneys, walls, and skylights — replaced or resealed.
  • Ventilation — ridge vent, box vents, or powered — sized for Texas attic heat.
  • Permit fees, cleanup, and the manufacturer and workmanship warranties in writing.

If a line is missing, ask. A low number that skips decking, flashing, or permits usually comes back as a change order.

Where You Live Matters

Houston Roof Replacement Pricing

Our headquarters is in Houston, and the Gulf Coast adds line items you will not see in a dry-climate estimate. Subtropical humidity feeds algae streaking, so most Houston bids specify algae-resistant shingles and synthetic underlayment. Hurricane season, June through November, is why wind-rated installs are standard here: six-nail patterns, sealed starter strips, and wind-rated ridge caps add a modest amount per square and matter when a tropical system pushes inland across Pearland, Clear Lake, Sugar Land, or Cypress.

Demand is the other factor. After a named storm, crews and materials get tight and prices drift up with lead times. If your roof is simply aging out, spring and early summer are usually the calmest time to schedule. See our Houston roofing page.

🌧

Dallas–Fort Worth

North Texas sits in the hail belt, so Class 4 shingles are the most common upgrade and many quotes are shaped around a possible claim.

Dallas roofing ›

Austin

Central Texas heat pushes homeowners toward reflective shingles and standing-seam metal. Steep Hill Country lots and tight access can add labor.

Austin roofing ›

🏠

San Antonio

Long, hot summers and a Spanish-style tradition mean more concrete and clay tile here. Tile costs more per square but shrugs off sun for decades.

San Antonio roofing ›

The Hail Factor

Do Class 4 Shingles Pay You Back?

Spring storms bruise roofs across the state every year, and North Texas takes the worst of it. Class 4 shingles cost more up front — usually a few thousand dollars over standard architectural — but they shrug off hail that would total a lesser roof.

The kicker: many Texas insurers offer a premium discount for a verified Class 4 roof. Over the life of the shingles, that recurring discount can offset a real chunk of the upgrade. Ask your carrier what they credit, and we’ll factor it into the math on your impact-resistant shingle quote.

When a Storm Hits

Can Insurance Cover the Cost?

If a covered hail or wind event damaged your roof, your out-of-pocket cost may be little more than your deductible — not the full replacement price. That is a different conversation entirely.

We inspect for storm damage at no charge, document every hit with photos, and meet your adjuster on-site. If water is coming in, we tarp it fast and schedule the permanent repair once the weather clears. See how our insurance claims support works, or start with a free roof inspection.

Paying for It

Financing Turns a Lump Sum Into a Monthly Payment

Not everyone wants to write one large check. Financing is available so the cost spreads into manageable monthly payments. Combine that with any insurance proceeds and a Class 4 discount, and a better roof is often closer than homeowners expect. See our financing page, or ask about a roof repair if the roof still has years left.

Cost Questions, Answered

Texas Roof Cost FAQ (2026)

How much does it cost to replace a roof in Texas?

Most asphalt-shingle replacements in Texas run roughly $9,000 to $22,000 depending on size, pitch, tear-off, and materials. Metal and tile cost more but last decades longer. You get an exact written price after a free inspection.

How do I estimate my roof cost per square?

Take your footprint, add a bit for pitch and overhangs, and divide by 100 to get squares. A 2,200 sq ft single-story is often around 24 squares; at a mid-range asphalt price near $500 per square that pencils out to roughly $12,000. A sanity check, not a quote.

Why is my neighbor’s roof cheaper than mine?

Two houses on the same street can price very differently. Pitch, roof size, the number of valleys and penetrations, how many old layers come off, and the shingle grade all shift the total.

Why do roofing quotes differ so much between companies?

Usually because they are not quoting the same job. One bid may reuse flashing, skip synthetic underlayment, leave out permits, or assume no decking work. Line them up against the checklist above and the gap explains itself.

Are impact-resistant shingles worth the extra money?

In hail-prone Texas, they often are. Class 4 shingles resist hail damage and frequently qualify for an insurance premium discount that adds up year after year. We’ll price both so you can compare.

How long does it take for a Class 4 roof to pay for itself?

It depends on your carrier’s discount and your premium. The upgrade is usually a few thousand dollars, and a recurring premium credit chips away at that every renewal. Add the hail claims you may avoid, and many homeowners come out ahead well within the shingle’s lifespan.

Will insurance pay for my new roof?

If a covered storm caused the damage, your policy may pay for the replacement minus your deductible. If the roof simply wore out from age, that is typically a homeowner expense. A free inspection tells us which situation you’re in.

Is it cheaper to replace a roof after hail season?

Often, yes. Right after a big hail or wind event, crews and materials are stretched. If your roof is aging rather than storm-damaged, booking in a quieter stretch means better scheduling and steadier pricing. If a storm did hit you, do not wait — get it documented before the next one.

Will I have to replace the roof decking too?

Only where it is rotted or soft. Decking is hidden until the old shingles come off, so a good quote states a per-sheet price up front and you pay only for sheets actually replaced. Most roofs need a few sheets at most.

Do I need a permit to replace my roof in Texas?

It depends on your city. Houston, Dallas, Austin, San Antonio, and many suburbs require a roofing permit; some unincorporated areas do not. We pull the permit where needed and include the fee in your written estimate.

Do you offer financing?

Yes. Financing is available so a new roof can fit a monthly budget rather than a single payment. See our financing page for details.


Service Areas

Roofing Across Texas

From our Houston headquarters, Texas Pro Roofer serves homeowners and businesses across the region. Find local roofing help in your area:

Don’t see your town? We work across Texas — request a free estimate or call (866) 625-1977.

FREE, NO-OBLIGATION ESTIMATE

Stop Guessing — Get Your Real Number

A free inspection turns every range on this page into one written price for your roof.

Call Texas Pro Roofer — (866) 625-1977
Scroll to Top